Справочник Пользователя для Nlynx ETU400

ETU400 User Guide 011603

 

1. 

Sign on to the AS/400 as QSECOFR.

2. 

Ensure that library QTEMP is in your library list.

3. 

Insert ETU software in the AS/400: 

•  If you are installing from diskettes, insert the first diskette

into the drive on the AS/400.

•  If you are installing from tape, load the tape into the tape drive. 

•  If you are installing from CDROM, insert the CDROM into the CDROM

drive.  

4. 

On the AS/400 command line, enter the RSTOBJ command interactively 

as follows:

For tape or diskette:

RSTOBJ OBJ(ETU*) SAVLIB(QTEMP) DEV(

device-name) VOL(*MOUNTED)

where device-name is the name of the device in which you loaded the

installation media (for example, OPT01, TAP01 or DKT01).

You should get 11 objects. 

For CDROM:

You should get 11 objects.

For diskette users, re-insert diskette 1. 

On the AS/400 command line, enter the ETU installation procedure. Type:

ETUINSTALL TLIBNAM(

target-library)  DEVNAM(device-name)

ELIBNAM(

existing-library)  SVTRANL(save-translations)

where:

target-library is the library in which ETU will reside after the

install process. If the library you specify already exists, we

recommend that it contain a prior version of ETU.

device-name is the name of the device in which the installation

media was loaded (for example, TAP01 or DKT01).

existing-library is a library on your system in which a prior

version of ETU exists that contains information you wish to keep in

its current state. If you want to replace your current version of

ETU and keep the old library name, the target-library name should

be the same as the existing-library name.  Specify *NONE if there

is no existing library.

save-translations is for users who have modified or created ETU

translation tables (the files TRANSLATE and MACTAB) in versions of

ETU prior to 5.01, and wish to keep those translation tables for

use with version 5.01. The default is (*NO) which does not keep the