Справочник Пользователя для Netopia R310
9-34 User’s Reference Guide
IP address serving
In addition to being a router, the Netopia R310 is also an IP address ser ver. There are three protocols it can
use to distribute IP addresses.
use to distribute IP addresses.
■
The first, called Dynamic Host Configuration Protocol (DHCP), is widely suppor ted on PC networks, as
well as Apple Macintosh computers using Open Transpor t and computers using the UNIX operating system.
Addresses assigned via DHCP are “leased” or allocated for a shor t period of time; if a lease is not
renewed, the address becomes available for use by another computer. DHCP also allows most of the IP
parameters for a computer to be configured by the DHCP ser ver, simplifying setup of each machine.
well as Apple Macintosh computers using Open Transpor t and computers using the UNIX operating system.
Addresses assigned via DHCP are “leased” or allocated for a shor t period of time; if a lease is not
renewed, the address becomes available for use by another computer. DHCP also allows most of the IP
parameters for a computer to be configured by the DHCP ser ver, simplifying setup of each machine.
■
The second, called BOOTP (also known as Bootstrap Protocol), is the predecessor to DHCP and allows
older IP hosts to obtain most of the information that a DHCP client would obtain. However, in contrast,
BOOTP address assignments are “permanent” since there is no lease renewal mechanism in BOOTP.
older IP hosts to obtain most of the information that a DHCP client would obtain. However, in contrast,
BOOTP address assignments are “permanent” since there is no lease renewal mechanism in BOOTP.
■
The third protocol, called Dynamic WAN, is par t of the PPP/MP suite of wide area protocols used for WAN
connections. It allows remote terminal adapters and NAT-enabled routers to be assigned a temporar y IP
address for the duration of their connection.
connections. It allows remote terminal adapters and NAT-enabled routers to be assigned a temporar y IP
address for the duration of their connection.
Since no two hosts can use the same IP address at the same time, make sure that the addresses distributed
by the Netopia R310 and those that are manually configured are not the same. Each method of distribution
must have its own exclusive range of addresses to draw from.
by the Netopia R310 and those that are manually configured are not the same. Each method of distribution
must have its own exclusive range of addresses to draw from.
To go to the IP Address Ser ving screen, select IP Address Serving in the System Configuration screen and
press Return.
press Return.
Main
Menu
System
IP Address
Configuration
Ser ving
• Ser ve DHCP Clients
• Ser ve BootP Clients
• Ser ve Dynamic WAN Clients
IP Address Serving
IP Address Serving Mode... DHCP Server
Number of Client IP Addresses: 100
1st Client Address: 192.168.1.100
Client Default Gateway... 192.168.1.1
1st Client Address: 192.168.1.100
Client Default Gateway... 192.168.1.1
Serve DHCP Clients: Yes
DHCP Lease Time (Hours): 1
DHCP NetBIOS Options...
DHCP Lease Time (Hours): 1
DHCP NetBIOS Options...
Serve BOOTP Clients: Yes
Serve Dynamic WAN Clients Yes
Configure Address Serving (DHCP, BOOTP, etc.) here.