Справочник Пользователя для Netopia R310

If you want to close your Telnet Console session, select Disconnect Telnet Console Session and press Return.

A dialog box appears asking you to cancel or continue your selection.

If you select Continue, you will immediately terminate your session.

You can reset the Netopia R310 to its factor y default settings. Select the Revert to Factory Defaults item in 
the Statistics & Diagnostics screen and press Return. Select CONTINUE in the dialog box and press Return. 
The Netopia R310 will reboot and its settings will return to the factor y defaults, deleting your configurations.

In an emergency, you can also use the Reset Switch to return the router to its factor y default settings. Call 
Netopia Tech Suppor t for instructions on using the Reset Switch.

Note: Reset to factor y defaults with caution. You will need to reconfigure all your settings in the router.

Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-ser ver 
application, with the Router as the client. To use the Router as a TFTP client, a TFTP ser ver must be available. 
Netopia, Inc. has a public access TFTP ser ver on the Internet where you can obtain the latest firmware versions.

To use TFTP, select Trivial File Transfer Protocol (TFTP) in the Statistics & Diagnostics screen and press 
Return to go to the Trivial File Transfer Protocol (TFTP) screen.

                         Utilities & Diagnostics

            +------------------------------------------------------+
            +------------------------------------------------------+
            |                                                      |
            | Are you sure you want to close this Console Session? |
            |                                                      |
            |       CANCEL                        CONTINUE         |
            |                                                      |
            |                                                      |
            +------------------------------------------------------+
                     X-Modem File Transfer...

                     Revert to Factory Defaults...

                     Restart System...