Справочник Пользователя для Netopia R310

After your account is set up, the ISP should send you the IP parameter information that will help you to configure 
the Netopia R310.

If you are using Smar tIP (NAT), you should obtain the following:

■

If you are dialing out to a remote site using Network Address Translation on your router, your provider will 
not define the IP address information on your local LAN. You can define this information based on 
parameters defined by another connection profile such as that to a corporate network, or an IP 
configuration that may already be in place for the existing network. Alternatively, you can use the default IP 
address range used by the router.

■

Primar y and Secondar y Domain Name Ser ver (DNS) IP Addresses

■

Domain Name (usually the same as the ISP’s domain name unless you have registered for your own 
individual domain name)

■

Telephone number of the ISP’s local or nearby dial-up POP (point-of-presence). 

■

PPP authentication type for router at the ISP, such as PAP.

■

Send and receive User Login name and Send and receive User Password if PAP or CHAP security 
authentication is used

If you are not using Smar tIP (NAT), you should obtain:

■

The number of Ethernet IP host addresses available with your account and the first usable IP host address 
in the address block

■

The Ethernet IP address for your Netopia R310

■

The Ethernet IP subnet mask address for your Netopia R310

■

The Default Gateway IP Address (same as Remote IP Address in most cases)

■

Primar y and Secondar y Domain Name Ser ver IP Addresses

■

Domain Name (usually the same as the ISP’s domain name unless you have registered for your own 
individual domain name)

Note: If you are not using Network Address Translation, you will need to obtain all of the Local LAN IP address 
information from your ISP.