Справочник Пользователя для Netopia R310

Be sure you have connected the cables and power source as described in 

.

Before you launch the Smar tStar t application, make sure your computer meets the following requirements: 

PC

Macintosh

System 
software

Windows 95, 98, or NT operating system

MacOS 7.5 or later

Connectivity 
software

TCP/IP must be installed and properly 
configured. See 

MacTCP or Open Transpor t TCP/IP must be 
installed and properly configured. See 

Connectivity 
hardware

Ethernet card (10Base-T)

Either a built-in or third-par ty Ethernet card 
(10Base-T)

Browser 
software

Netscape Communicator™ or Microsoft Internet Explorer, included on the Netopia CD. 
Required for web-based registration and web-based monitoring.

Notes: 
• The computer running Smar tStar t must be on the same Ethernet cable segment as the Netopia R310. 
Repeaters, such as 10Base-T hubs between your computer and the Netopia R310, are acceptable, but 
devices such as switches or other routers are not.
• Smar tStar t for the PC will set your TCP/IP control panel to “Obtain an IP address automatically” if it is 
not already set this way. This will cause your computer to reboot. If you have a specified IP address 
configured in the computer, you should make a note of it before running Smar tStar t, in case you do not 
want to use the dynamic addressing features built in to the Netopia Router and need to restore the fixed IP 
address.