Справочник Пользователя для Netopia R310

When using unnumbered inter faces, the Netopia Router will use either its local Ethernet IP address or its 
NAT address (if so configured) and subnet mask to send packets to the remote router. Neither router has a 
WAN IP address or subnet mask associated with this connection. 

Note: If your ISP has not given you their IP or subnet mask addresses, then you may enter an IP address 
such as 127.0.0.2, and an IP subnet mask such as 255.0.0.0. which are acceptable as defaults values, 
and will typically be assigned at the time of connection.

4.

For circuits with PPP enabled: Select the PPP Authentication pop-up menu and choose the type of 
connection security your ISP told you to use (either None, PAP, CHAP, PAP-TOKEN, or CACHE-TOKEN). If 
you choose PAP, CHAP, PAP-TOKEN, or CACHE-TOKEN, go to the next step. If your ISP does not use any of 
these authentication methods, choose None and skip to the last step. When you create a connection 
profile from Easy Setup, the default setting is PAP.

5.

For circuits with PPP enabled: If your ISP uses PAP, select Send User Name and enter the user name your 
ISP gave you to connect. Then select Send Password and enter the password. 

If your ISP uses CHAP, select Send Host Name and enter the user name your ISP gave you to connect. Then 
select Send Secret and enter the secret (CHAP term for password) your ISP gave you.

6.

Select NEXT SCREEN and press Return. The IP Easy Setup screen appears.