Справочник Пользователя для New Buck Corporation 81
INSTALLATION OF CLOSE CLEARANCE
SHIELDS (Optional)
1. Take rear close clearance shield and center with back of stove using self-tapping screws.
2. Remove self-tapping screws from rear of stove. Align holes in side shield with holes in rear
2. Remove self-tapping screws from rear of stove. Align holes in side shield with holes in rear
shield and attach to stove.
3. Before tightening the screws, insert the front end of the shield behind the side angle on the
front side of the stove. Use the same step to install side shield on the opposite side of the
stove.
stove.
4. Loosen two top screws holding side shield at rear top. Insert pipe shield where back shield
and top rear side shield meets. Tighten screws.
23