Справочник Пользователя для NEC EXPRESS 5800
C-2
Installing and Configuring Windows 2000 and Windows NT 4.0
Installation Assumption
The installation and configuration instructions in this appendix assume the following:
!
You have properly completed the hardware installation.
!
You have run the BIOS Setup Utility to check system configuration.
IMPORTANT:
To successfully install Windows 2000 on your system, PnP
must be enabled in your system BIOS.
!
You will be installing Windows
®
2000 Operating System from the
CD-ROM media.
IMPORTANT:
If you have the optional disk array controller preinstalled on
your system, it was preconfigured at the factory. Refer to your system's User's
Guide and to the RAID Installation Guide and the Disk Array Controller
Installation Guide and User’s Manual for additional information on this option
card. If you need to change the RAID level from the factory setting, you must
change the setting before installing the operating system.
Guide and to the RAID Installation Guide and the Disk Array Controller
Installation Guide and User’s Manual for additional information on this option
card. If you need to change the RAID level from the factory setting, you must
change the setting before installing the operating system.