Справочник Пользователя для NEC DLP Cinema Projector NC2500S
2. Installation and Connection
16
2-2. Connecting the image input terminals
Your projector has four image input terminals, namely, the HDSDI A input terminal, the HDSDI B input terminal, the DVI-D A
input terminal, and the DVI-D B input terminal.
• HDSDI A/B input terminal (SDI A/SDI B) ------------ Inputs serial digital images from a Video Server or Video source.
• DVI-D A/B input terminal (DVI A/DVI B) ------------- Inputs digital RGB signals from a PC.
SDI-A
SDI-B
DVI-A
DVI-B
GP I/O
LAN-A LAN-B
REMOTE
IN
RS-232C
PC CARD
USB
CINEMA
SYSTEM
75
Ω coaxial cable
DVI-D signal cable
Ferrite clamp core (accessory)
• Information for Reducing Radiation of Electromagnetic Waves
To reduce unnecessary radiation of electromagnetic waves, use the supplied ferrite clamp core.
• Mounting the ferrite clamp core
1
Open the accessory ferrite clamp core and attach it to the DVI-D signal cable.
When doing so, attach this as close as possible to the end that goes to the projector.
* Push the catch to open the ferrite clamp core.
* Push the catch to open the ferrite clamp core.
2
Close the ferrite clamp core tightly.
3
Fix the supplied band to the signal cable as a stopper.
Band
* Pull the end of the band to tighten it. Cut off the surplus of the band.
NOTE
Be sure to use the ferrite clamp core at the end of the DVI-D signal cable.