Справочник Пользователя для National Instruments Image Acqusition Software NI-IMAQdx
Chapter 1
Introduction to NI-IMAQdx
1-2
ni.com
Application Development Environments
This release of NI-IMAQdx supports the following ADEs
for Windows Vista/XP/2000:
for Windows Vista/XP/2000:
•
LabVIEW version 7.1.1 and later
•
LabVIEW Real-Time Module version 7.1.1 and later
•
LabWindows
™
/CVI
™
version 7.0 and later
•
Microsoft Visual C/C++ version 6.0 and later
•
Microsoft Visual Basic version 6.0 and later
•
Microsoft Visual Studio .NET 2003 and later
Note
Although the NI-IMAQdx software has been tested and found to work with these
ADEs, other ADEs may also work.
Configuring Your Camera
Use National Instruments Measurement & Automation Explorer (MAX) to
configure your camera. Refer to the Measurement & Automation Explorer
Help for NI-IMAQdx for information about configuring your camera. You
can access the Measurement & Automation Explorer Help for NI-IMAQdx
from within MAX by going to Help»Help Topics»NI-IMAQdx.
configure your camera. Refer to the Measurement & Automation Explorer
Help for NI-IMAQdx for information about configuring your camera. You
can access the Measurement & Automation Explorer Help for NI-IMAQdx
from within MAX by going to Help»Help Topics»NI-IMAQdx.
The camera configuration is saved in a camera file, which the NI-IMAQdx
VIs and functions use to configure a camera and supported attributes.
VIs and functions use to configure a camera and supported attributes.