Справочник Пользователя для Namco Bandai Games 90500150
Page 44
5-5
Game Initialization
•
Be sure to perform the following initialization process before the game is
played for the first time, and after replacing the Game PC Board, Steering
Assy Potentiometer, Accelerator/Brake pedal potentiometers, or after
initializing the backup data. The game will not play properly without
executing the initialization.
played for the first time, and after replacing the Game PC Board, Steering
Assy Potentiometer, Accelerator/Brake pedal potentiometers, or after
initializing the backup data. The game will not play properly without
executing the initialization.
•
After initializing potentiometers, conduct a switch test
(see 6-2-2-2(b) page 54)
to ensure that “OK” is shown when the steering wheel,
accelerator pedal or, or brake pedal are operated.
1.
While pressing the Service button, press the Test switch. The following screen is
displayed.
displayed.
2.
Ensure that the steering wheel is in the centre position. Remove your hands from
the steering wheel, and your feet are removed from the accelerator and brake
pedals. (Initialization will not be completed correctly if the steering wheel or
accelerator/brake pedal is operated).
the steering wheel, and your feet are removed from the accelerator and brake
pedals. (Initialization will not be completed correctly if the steering wheel or
accelerator/brake pedal is operated).
3.
With the steeering wheel and pedals as described above, press the Service
switch. The potentiometers will be initialized.
switch. The potentiometers will be initialized.
4.
After the initialization, the screen for the switch test
(see 6-2-2-2(
b) page 54)
appears. Turn the steering wheel fully to the right and then to the left, and make
sure that “RIGHT OK” and “LEFT OK” is displayed on the screen.
sure that “RIGHT OK” and “LEFT OK” is displayed on the screen.
5.
Fully depress the accelerator and brake pedals, and make sure that “OK” is
displayed for both pedals.
displayed for both pedals.
6.
Press and hold the Service switch, and press the Test switch to return to the I/O
test screen.
test screen.
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
I/F INITIALIZE
STEERING +000
GAS 000
BRAKE 000
GAS 000
BRAKE 000
KEEP HANDLEBAR CENTER AND
PRESS SERVICE TO STORE THE RESULT