Инструкции Пользователя для Korg Toneworks AX1500G

Example

display

Each time you press the effect channel switch, effect
channels A and B will alternate. When channel A is
selected, the channel LED is lit green, and when
channel B is selected, the LED is lit red.

When you switch programs, this setting lets you
specify whether the channel memorized in the
program will be selected (OFF) or whether the status
prior to switching programs will be maintained (On).
The factory setting is OFF.
1. Press and hold the EXIT switch, and press the effect

channel switch so that the name display indicates
“

” and the MASTER/VALUE display

indicates “

” or “

”.

2. Continue holding the EXIT switch, and press the

effect channel switch to change the setting between
On and OFF.

3. Release the EXIT switch to return to Play mode.

If you press and hold the program switch for 0.5
seconds, all effects will be bypassed. At this time, the
program LED will blink, and the name display will
indicate “

” for one second.

To defeat bypass, press the program switch whose LED
is blinking, or press any other program switch.

You can turn this on/off by simultaneously pressing
MASTER/VALUE switch (

▼

) and cursor switch (

). You

can also turn it off by pressing the EXIT

switch

.

If you press and hold the program switch for 1.5
seconds or longer, the input sound (ie., guitar) from the
INPUT will be muted. At this time, the program LED
will blink more rapidly, and the name display will
indicate

 

“

” for one second.

To defeat mute, press the program switch whose LED
is blinking, or press any other program switch.

This can be turned on by simultaneously holding
MASTER/VALUE switch (

▼

) and cursor switch (

) for

one second, and off again by repeating this operation. It
can also be turned off by pressing the EXIT switch.

When the AX1500G is in bypass or mute, the tuner will
operate automatically. If you mute the AX1500G you
will be able to tune your instrument without produc-
ing sound. This is used for on stage tuning.

1. Tune your guitar so that the desired

note name appears in the bank
number display. The decimal point
“

” at the lower right of the bank

number display will light to indicate
a sharp 
.

2. Fine-tune your guitar so that only the center of the

five value LED’s is lit (or so that only the center of
the name display is shown).

Tuning discrepancy shown by the value LEDÕs

and the name display

Pitch is flat

Pitch is sharp

Correct tuning

Name display

Value LEDÕs

Changing the calibration setting
If necessary, you can adjust the calibration in the range
of 438—445 Hz. (440 Hz is “standard”)
When the tuner is operating, use the MASTER/VALUE
switches (▲, ▼) to adjust the setting. The calibration
setting will appear in the MASTER/VALUE display.

When the power is turned off, the calibration setting you
modify will be lost, and will automatically return to 440 Hz
the next time the power is turned on.

1. When you simultaneously press the RENAME and

switches, the metronome will start and the

metronome icon will blink.

2. Use value knob 4 to adjust the tempo (range 40—

208: shown in the MASTER/VALUE display). At
this time, the metronome LED will blink in time
with the tempo.

3. Use value knob 5 to adjust the volume of the

metronome (range 0—10: shown in the MASTER/
VALUE display).

4. While the metronome is operating, simultaneously

press the RENAME and EXIT switches to stop the
metronome.

Tempo

Level

On, Off

If you switch programs or edit while the metronome is
operating, it will no longer be possible to adjust the tempo
or level. To re-adjust the tempo or level, you must first
stop the metronome, and then start it once again.