Справочник Пользователя для King Technology Swimming Pool Filter 5450
Replacing a
POOL FROG
POOL FROG
®
Pac
Cutting handle from POOL FROG
®
Pac using Pac
Cutting Tool or a hacksaw
(KEEP OUT OF REACH
OF CHILDREN).
B. If using a Pac Cutting
Tool, place curved section
of tool around the narrow
end of one Pac tower and
line up blade on indent.
Tool, place curved section
of tool around the narrow
end of one Pac tower and
line up blade on indent.
A. Find the
indent in
the plastic.
indent in
the plastic.
C. Squeeze the handles
together. Repeat for other
side.
together. Repeat for other
side.
D. If using a hacksaw to
cut the Pac, line up
hacksaw blade on indent
and cut with a smooth
sawing action.
cut the Pac, line up
hacksaw blade on indent
and cut with a smooth
sawing action.
F. If openings are pinched
together, open with fingers or
re-cut closer to the colored
screens inside POOL FROG
together, open with fingers or
re-cut closer to the colored
screens inside POOL FROG
®
Pac. Leave at least 1/4" of
plastic to fit into POOL
FROG
plastic to fit into POOL
FROG
®
Chlorine Cycler base.
Finished cut ends
E. Whether using a Pac
Cutting Tool or a hacksaw,
make sure the blade comes
straight across on the indent
line for a clean cut.
Cutting Tool or a hacksaw,
make sure the blade comes
straight across on the indent
line for a clean cut.
POOL FROG
Pac
towers
Pac
towers
POOL FROG
Pac
towers
Key in POOL
FROG
Chlorine
Cycler
FROG
Chlorine
Cycler
Opening in
POOL FROG
Pac
POOL FROG
Pac
A correct
oval opening
oval opening
Avoid a
pinched
opening.
pinched
opening.
Indent in plastic
1.
2.
3.
4.
5.
6.
9
POOL FROG Pac
POOL FROG
®
Mineral Cycler
POOL FROG
®
Chlorine
Cycler
Replace cap by hand only.
DO NOT OVERTIGHTEN.
DO NOT OVERTIGHTEN.
DO NOT USE CAP TOOL
TO TIGHTEN CAP.
FOR REMOVAL ONLY.
TO TIGHTEN CAP.
FOR REMOVAL ONLY.
Turn POOL FROG
®
Pac
over and shake slightly
until tablets fall into tower
areas.
until tablets fall into tower
areas.
Avoid sparks, open flame
or smoking while handling
the POOL FROG
or smoking while handling
the POOL FROG
®
Pac.
Insert POOL FROG
®
Pac
into POOL FROG
®
Chlorine
Cycler, lining up the
openings in the POOL
FROG
openings in the POOL
FROG
®
Pac with keys in
POOL FROG
®
Chlorine
Cycler.
NOTE: Openings are a
different shape than keys.
NOTE: Openings are a
different shape than keys.
The POOL FROG
®
Pac is
made of HDPE #2 plastic.
When the POOL FROG
When the POOL FROG
®
Pac is empty, triple rinse
in pool water, drain, and
recycle or wrap in
newspaper and discard in
trash.
in pool water, drain, and
recycle or wrap in
newspaper and discard in
trash.
CAUTION Read Carefully – USE ONLY the factory recommended replacement Pac. (See
label.) DO NOT USE any other Pac or bulk chemical tablets in the POOL FROG
label.) DO NOT USE any other Pac or bulk chemical tablets in the POOL FROG
®
Chlorine Cycler.
Use of any other product could result in over chlorination, bleached liners, unsafe pool conditions,
fire or explosion. Warranty will be void if the correct Pac is not used.
fire or explosion. Warranty will be void if the correct Pac is not used.
Open POOL FROG
®
Chlorine Cycler using cap
tool by hitting the handle
with the flat of your hand
counter clockwise. Stand
back upon removing cap to
avoid inhaling fumes.
tool by hitting the handle
with the flat of your hand
counter clockwise. Stand
back upon removing cap to
avoid inhaling fumes.
Turn off pump. Turn dial to Set-
ting 0. This reduces the flow of
water into the unit when the
cap is open.
ting 0. This reduces the flow of
water into the unit when the
cap is open.