Справочник Пользователя для Jensen Tools VM9511TS
1
VM9511TS
PREPARATION
Congratulations on your purchase of the Jensen VM9511TS
Mobile Multimedia AM/FM/DVD Receiver.
Mobile Multimedia AM/FM/DVD Receiver.
It’s a good idea to read all of the instructions before beginning
the installation. We recommend having your Jensen
VM9511TS installed by a reputable installation shop.
the installation. We recommend having your Jensen
VM9511TS installed by a reputable installation shop.
Features
DVD
•
•
Compatible formats: DVD-R, DVD-RW, DVD+R,
DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD,
VCD, MPEG2, MPEG4, AVI and JPEG
DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD,
VCD, MPEG2, MPEG4, AVI and JPEG
•
Region 1 playback
•
16:9 Aspect ratio- Wide / Normal / Cinema
•
Front panel DVD control
•
High-speed Fast Forward / Fast Rewind 2X, 4X, 8X, 32X
•
Play, Pause, Stop, Slow
•
Chapter Up / Down
•
V-SEL - MultiZone output 'Kid-Zone'
•
Wolfson Microelectronics high performance 24-bit, 192
kHz DAC supports 6-channel and 2-channel "Down-Mix”
audio modes
kHz DAC supports 6-channel and 2-channel "Down-Mix”
audio modes
•
16MB high-speed flash memory - 80nS access time
•
2 second ESP (Electronic Skip Protection)
Integrated SD Card Reader
•
•
Compatible formats: MP3, WMA, AVI, MPEG1, MPEG2,
MPEG4 and JPEG
MPEG4 and JPEG
•
Supports up to 2GB SD card
MP3/WMA
•
•
GIGA MP3 - Store up to 999 MP3 files on a DVD
•
ID3-tag compatible
•
Direct track access
•
Play, Pause, Stop, Track Up / Down
•
60 second (MP3), 120 second (WMA) ESP - Electronic
Skip Protection
Skip Protection
CD
•
•
CD-text compatible
•
4 second ESP (Electronic Skip Protection)
AM/FM Tuner
•
•
User-selectable frequency spacing
•
30 Station presets (18FM/12AM) JENSEN Plus Tuner II
Outboard Media Module
•
•
Input adapter for TV Tuner, XM and iPod
TV Tuner (Included)
•
•
VHF 2-13
•
UHF 14-69
•
TV antenna (3.5mm antenna included)
•
F-Connector/Coaxial Antenna Input (optional)
XM Ready
•
•
Requires optional Terk XMD1000 tuner box
•
Requires optional Terk XMDJEN100 or Jensen JXMC XM
cables
cables
•
Advanced display shows the artist, song title, and XM
channel and category at a glance
channel and category at a glance
•
Direct channel entry
Navigation Ready
•
•
Requires optional NAV100 navigation module
jLink Ready
•
•
Controls and charges all iPod's except "Shuffle"
•
Displays all text information including category, track
name, artist and channel number
name, artist and channel number
Chassis
•
•
7-inch TFT touch screen LCD - 336,960 pixels (1440W X
234H)
234H)
•
TSD - Touch Screen Display menu control
•
Fully automatic motorized TFT LCD flip-out and up
•
16-step TFT LCD tilt adjustment
•
Beep Tone confirmation
•
1.0 Din
•
Import/ISO/DIN mountable
•
Heat management system - Incorporates forced air-
cooling to keep the chip-sets operating at nominal
temperatures
cooling to keep the chip-sets operating at nominal
temperatures
•
Heavy duty galvanized chassis
Multi-ZONE
•
•
Allows front passengers to listen to the radio while rear
passengers listen to a CD, MP3, WMA or watch DVDs
passengers listen to a CD, MP3, WMA or watch DVDs
General
•
•
Full function infrared remote control
•
Limited function infrared "Kid Zone" remote
•
OSD - On Screen Display menu control
•
High-performance audio processor
•
Electronic volume, bass, treble, balance and fader
•
•
Bass center frequency adjustment - 60, 80, 100, 130,
150 and 200Hz
150 and 200Hz
•
Bass Q factor - 1.0, 1.25, 1.5 and 2.0
•
Treble center frequency adjustment - 10, 12.5, 15 and
17kHz
17kHz
•
Subwoofer crossover - 80, 120 and 160Hz
•
Subwoofer Phase - 0 - 180 degrees
•
Subwoofer level - variable
•
100-ohm low impedance pre-amp outputs, all channels
•
5V Peak / 2V RMS RCA outputs, all channels
•
1-pair front RCA outputs and 1-pair rear/surround RCA
outputs
outputs
•
Single Subwoofer RCA output
•
Center Channel RCA pre-amp output (variable)
•
1-pair headphone/Multi-ZONE RCA outputs
•
1-pair auxiliary RCA A/V inputs
•
Back-up camera input with reverse override
•
1 NTSC composite video output for additional screens
•
NTSC Multi-ZONE composite video for additional screens
•
Front panel (when screen is closed) high contrast LCD
•
Rotary encoder audio control
•
Joystick menu navigation
Tools and Supplies
You will need these tools and supplies to install your
VM9511TS:
VM9511TS:
•
Torx type, flat-head and Philips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio (screwdriver, socket
wrench set or other tools)
wrench set or other tools)
•
Electrical tape
•
Crimping tool
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16 – 18 gauge speaker wire
WARNING! Only connect the unit to a12-volt power
supply with proper grounding.
supply with proper grounding.
WARNING! Never install this unit where operation and
viewing could interfere with safe driving conditions.
viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident
(except when using for rear-view video camera) never
use the video display function while driving the vehicle.
This is a violation of federal law.
(except when using for rear-view video camera) never
use the video display function while driving the vehicle.
This is a violation of federal law.
WARNING! Never disassemble or adjust the unit without
the assistance of a professional. For details, please
consult your local car stereo specialty shop.
the assistance of a professional. For details, please
consult your local car stereo specialty shop.
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
expose this unit to moisture or water.