Справочник Пользователя для Jabra 410

5

JABRA SPEAK 410 USER MANUAL

Increase/decrease Ringtone Volume
1.  Press and hold the Jabra button 

 for 2 seconds. The LEDs will light up yellow, and the speakerphone will 

play the current ringtone volume.

2.  Tap (or press and hold) the + / – buttons to adjust the ringtone volume.
3.  Tap the Jabra button, or do not press any buttons for 2 seconds, to apply the new ringtone volume.

Note: When the speakerphone is ringing, tap (or press and hold) the + / – buttons to increase/decrease the 

ringtone volume.

Call waiting allows a current call to be placed on hold, and an incoming call to be answered. Additionally, 

it is possible to switch between the held call and the current call. Supported softphones with call waiting 

functionality only.

Accept incoming call, and put current call on hold

Tap the green handset button 

Reject incoming call, and remain on current call

Tap the red handset button 

Switch between current call, and call on hold

Tap the green handset button 

End current call, and switch to call on hold

Tap the red handset button  ,  

and then tap the green handset button 

Connect a Jabra headset to the headset port on the the speakerphone. All audio is automatically transferred to 

the connected headset, except for the incoming call ringtone which plays on the Jabra SPEAK 410.

Note: It is possible to connect a Jabra QD headset by using a Jack-to-QD converter cord. Contact your Jabra 

supplier or visit www.jabra.com to purchase the Jack-to-QD converter cord.

To listen to music played on a PC using the speakerphone, the Jabra SPEAK 410 must be set as the default audio 

playback device in Windows.
1.  Launch Windows Control Panel, and double-click Sound and Audio Devices.
2.  Select the ´Audio´ tab, and set the Jabra SPEAK 410 as the default sound playback device . Click apply to save 

your settings.

Music played on the PC will now play through the connected speakerphone.

1.  Ensure the Jabra SPEAK 410 is connected, and then launch Jabra Control Center by clicking Windows Start and 

selecting All Programs > Jabra > Jabra PC Suite > Jabra Control Center.

2. Under Target softphone for outgoing calls, select either Microsoft or Softphones supported by Jabra PC 

Suite.

3.  Launch the supported softphone, and view the audio configuration to ensure the Jabra SPEAK 410 is selected 

as the target for speaker and microphone.