Справочник Пользователя для Multiplex Technology 16CH

41

c Select the desired channel, and 

press “

Edit

Edit” to enter the motion 

detection sensitivity and area setting 
box.

d

Motion Detection Sensitivity:

Set the detection sensitivity in 4 
different adjustable factors.

LS: The sensitivity of comparing two 
different images. The smaller the 
value is, the higher sensitivity for 
motion detection.

SS: The sensitivity towards the size 
of the triggered object on the screen 
(the number of motion detection 
grids). The smaller the value is, the 
higher sensitivity for motion detection.

TS: The sensitivity towards how long 
the object gets triggered. The smaller 
the value is, the higher sensitivity for 
motion detection.

RE: The value of RE is a reference 
for detection. The bigger the value is, 
the higher sensitivity for motion 
detection.

e

Select LOW / HIGH for the alarm 
polarity. 

f

Motion Detection Area:

Clicking the area by PC mouse, 
one can choose the motion area to 
be detected. 

The under

The under

-

-

detection 

detection 

area is in transparent picture while 

area is in transparent picture while 

the undetected area is in pink color.

the undetected area is in pink color.
*Click the “Select All” to clean the 
previously selected detection area. 
*Click the “Clear All” to activate the 
detection area as full area.

g After setting, press “OK” and then 

press “APPLY” to confirm.

60.121.46.236

Note:  Enable the motion detection function.

When the motion is triggered,
a  “

” icon will shown on the 

screen. And software AP will start 
recording automatically.