Справочник Пользователя для Motorola DV6001

•    If the disc is a recordable CD, make sure that the disc had 

been fi nalized.

Check that the track(s) are in the MPEG1 Audio Layer 
3 format.

•    If a track name does not end in “.mp3” or “.MP3”, this 

player will not recognize it as an MP3 track.

•    This player only recognizes about 650 fi les per folder and 

300 folders per disc. If there are more titles than this, you 
will not be able to play them.

•    This player is not compatible with multi-session discs. 

If the disc is multi-session, you will only be able to play 
tracks recorded onto the fi rst session.

•    Set the input selector on the connected TV or HDMI/DVI 

component to this unit.

•    This unit cannot be connected to TVs or HDMI/DVI 

components that do not support HDCP.

•    Reset this unit and the TV or HDMI/DVI component by 

turning them off and on.

•    Can the connected TV or HDMI/DVI component use the 

selected resolution? 

Set the HDMI VIDEO under HDMI Setup. (page 45)

•    Set the input selector on the connected TV or HDMI/DVI 

component to this unit.

•    TVs or HDMI/DVI components that do not support HDCP 

cannot output video from this unit.

•    The unit will not output an audio signal if Audio has been 

turned off under HDMI AUDIO OUT Setup. (page 39)

•    Some HDMI-compatible monitors do not support audio 

output.

•    The unit will not output an audio signal if a DVI 

com po nent has been connected.

•    Check that the DivX fi les are encoded with “Home 

Theater's mode with DivX” certifi ed encoder.

•    The audio codes may not be supported by the DVD player.

•    Check that fi le size of the movies does not exceed the fi le 

size of the CD disc during burning.