Справочник Пользователя для Mocomtech CDM-570

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

IP Module - CLI and Telnet Operation 

MN/CDM570L.IOM 

 

Database Operations Page is activated from Operations and Maintenance Page. 
 

 
The Database Operations option allows the user to view, save, or erase an existing user 
configuration of the  IP Module. An  IP Module uses these types of configuration files to 
initialize itself on power-up.  
The User Configuration File allows a User to over-write the values defined in the Factory 
Configuration file. This allows full customization of a  IP Module without erasing a set of 
parameters defined from the factory. The User configuration file can also be retrieved or 
overwritten via FTP by specifying the filename ‘param1’. 
The Administrative Database Operations Page contains the following options/fields: 
 

Restore Factory Default 

Restores the 

IP M

odule settings to “safe” values as 

defined by the factory. 

Load Parameters from 
permanent storage 

This option overwrites the current configuration of the 

IP 

M

odule with the configuration last saved to permanent 

storage. It allows the user to perform an “Undo” type 
operation if the 

IP M

odule is put into an undesirable 

state by the user. 

Save Parameters 

This option allows a user to save the current 
configuration of the 

IP M

odule to permanent storage. 

This configuration will be restored on each successive 
power cycle. 

Exit 

This option allows a user to exit the current menu and 
return to its parent menu. 

17–74