Справочник Пользователя для Mitsubishi Electronics Mitsubishi Digital Electronics Water System SW1DNC-GXW2-E
3.4.2 Batch monitoring of device values
3 - 35
1
OV
E
R
VI
EW
2
CRE
A
T
E
D
PROGRAM
AN
D SYS
TEM
CONF
IGURA
TION
3
CR
EA
TI
NG PR
O
G
R
A
M
IN
S
TRUC
TUR
E
D
L
A
DDE
R/
FB
D
LA
NG
UA
G
E
4
CREA
T
ING
PROG
RAM IN ST
LANGUAGE
5
CRE
A
TI
NG T
W
O OR
MORE PROGRAM
BLO
C
K
S
3.4 Monitoring Operations
4.
Set the Display Format of the device to be
monitored.
monitored.
Setting on the Display Format screen
• Monitor Format
: Bit and Word
• Display
: 16 bit Integer
• Value
: DEC
• Bit Order
: 0-F
• Switch No. of Points : Bit Device Bit and Word
Format 16 Points
After the setting, click the
button to close
the Display Format screen.
Refer to the following manual for the details on
Display Format.
Refer to the following manual for the details on
Display Format.
GX Works2 Version 1 Operating Manual
(Common)
(Common)
5.
Click
(Start Monitoring) on the toolbar to
start monitoring.
6.
Set the programmable controller CPU to RUN.
Set the RUN/STOP switch on the programmable
controller CPU to "RUN".
controller CPU to "RUN".
7.
Click
(Stop Monitoring) on the toolbar to
stop monitoring.
Monitored values remain even after GX Works2
stops monitoring.
stops monitoring.
● You can save the contents set on the Display Format screen.
When the monitoring screen is opened again, the contents set previously on the Display Format
screen will not be displayed. (The default setting will be displayed.) To display the previous
setting, you can save the setting to a file, and read the file. To save the setting, click Save
Display Format on the Device/Buffer Memory Batch Monitor screen. To read the saved setting,
click Open Display Format on the Device/Buffer Memory Batch screen Monitor screen.
screen will not be displayed. (The default setting will be displayed.) To display the previous
setting, you can save the setting to a file, and read the file. To save the setting, click Save
Display Format on the Device/Buffer Memory Batch Monitor screen. To read the saved setting,
click Open Display Format on the Device/Buffer Memory Batch screen Monitor screen.
Current value
(To the next page)