Справочник Пользователя для Mitsubishi Electronics Mitsubishi Digital Electronics Water System SW1DNC-GXW2-E

4 - 8

You can switch the programmable controller status between "RUN" and "STOP" using remote operation as 

follows.

The Settings of the remote operation may vary depending on the programmable controller used.

Refer to the following manual for the details on the remote operation:

GX Works2 Version 1 Operating Manual (Common)

Select [Online] 

 [Remote Operation] to display the Remote Operation screen. You can switch the 

programmable controller status between "RUN" and "STOP" on this screen.  

Operation

Allows you to select the 
programmable controller 
CPU status to be set.  
Select either "RUN", 
"PAUSE" or "STOP" for 
this example.

Programmable 
controller status
Displays the programmable 
controller CPU status.

Connection Channel 
List information

Displays the connection 
target information 
currently set.

Specify Execution
Target

Allows you to set the 
target station for 
remote operation.  
Select "Currently 
Specified Station" for 
this example.

Operation during RUN

Allows you to set the 
operations to be 
executed to the device 
memory and signal 
flow when the 
programmable 
controller CPU is 
switched to RUN.

Displays the OFF status.

Displays the ON status.

Displays the current values.

(To the next page)