Справочник Пользователя для Mitsubishi Electronics Mitsubishi Digital Electronics Home Theater Server QnUCPU

CHAPTER9 DEVICES

9.

5 

 M
odule A

cce
ss 
Devices

9.

5.

2  
Cyc

lic

 t

ransm

ission 

area d

e

vice 

(U3En\

G

)

9

 

-

 

45

9.5.2  Cyclic transmission area device (U3En\G )

The cyclic transmission area device is used to access the CPU shared memory of each CPU module in a multiple 
CPU system.

 • The transfer speed is higher than the case of using the write (S.TO or TO) or read (FROM) instruction to the 

CPU shared memory, resulting in reduced programing steps.

 • Using the cyclic transmission area device allows bit manipulation.
 • By setting device comments for the cyclic transmission area device, program readability is increased.
 • Because information on the CPU shared memory can be directly specified as an argument of the instruction, 

no interlock device is required.

Specify the I/O number of the CPU module and the CPU shared memory address.

For details of the cyclic transmission area device, refer to the following.

 QCPU User's Manual (Multiple CPU System)

Specification method:U3En\G

CPU shared memory (setting range: 0 to 4096, 10000 to 24335 in decimal)

 

Starting I/O number of the CPU module

Setting: First 3 digits of starting I/O number

CPU module mounting location:

* CPU slot (CPU No.1): 3E00

H

     3E0

* Slot 0 (CPU No.2): 3E10

H

     3E1

* Slot 1 (CPU No.3): 3E20

H

     3E2

* Slot 2 (CPU No.4): 3E30

H

     3E3