Справочник Пользователя для Mitsubishi Electronics Diamond View Colour LCD Monitor DV180

6 

If you encounter any problems using this product, make sure that your monitor 
is properly installed. Please refer to chapter 4 of this manual for the 
installation guide. The answers to some common questions follow: 

 
9  There is some noise or flickering on the screen or the picture is unstable. 

Check: 

‰ 

Signal cable connector pins. If there are bent or missing pins, 
consult your place of purchase.   

‰ 

Graphics card. Check that the drivers and settings are correct.  

‰ 

The set up of the monitor. If you are using Windows re-run the test 
pattern program (Auto.exe) that is on the floppy disk supplied with 
the monitor and press the monitor’s AUTO button.  

‰ 

This may be caused by non-standard signal frequencies from the 
VGA card. It is not a defect and can be improved by manually 
adjusting the Clock Phase and Pixel Frequency in the image menu. 

‰ 

Scanning frequency.  Change the settings of your graphics card to 
one of the Supported Graphics Signals and Timings specified on 
page 19 and re-align the monitor. 

 

9  The image appears grainy or edges of objects appear jagged. Check: 

‰ 

The resolution of the graphics card. Graphics resolutions below 
1280 x 1024 will appear as full screen images, but they are not 
optimal. Increase the resolution to 1280 x 1024 pixels. 

 
9  I can't find the DV180 on the Windows 95, 98 or 2000 monitor lists. 

‰ 

You need to update the Windows setup information file for your 
DV180. This is on the diskette that was supplied with your monitor. 
You can also download the files from the File Downloads section of 
Mitsubishi Electric Australia’s web site at:  

 

 

http://www.mitsubishi-electric.com.au