Справочник Пользователя для McDATA OPENconnectors Command Line Interace

2XWSXW([DPSOH

The output from the config.port.show command displays as follows.

Port Number:        4
Name:               Sam’s tape drive
Blocked:            false
Extended distance:  false
Type:               F Port
Speed:              2 Gb/sec

FRQILJVHFXULW\IDEULF%LQGLQJ

Note that the config.security.fabricBinding commands function in a 
different way from most CLI commands, which are single action 
commands that take effect immediately. The first Fabric Binding 
command entered invokes a work-area editor. The commands take 
effect on a temporary copy of a Fabric Member List in the work area 
until the temporary copy in the work area is activated to the fabric--or 
is discarded.

Because not all the verification of the Fabric Member List can occur 
on the temporary copy in the work area, it is possible, however 
unlikely, that the copy of the list encounters no errors until the list is 
activated to the fabric. 

6\QWD[

activatePending

3XUSRVH

This command activates the fabric binding configuration contained in 
the pending work area to the fabric. 

Type

The port type. Valid values are:

• F Port
• E Port
• G Port
• Fx Port (Sphereon 4500 only)
• Gx Port (Sphereon 4500 only)

Speed

The port speed. Valid values are 1 Gb/sec, 
2 Gb/sec, and Negotiate.