Руководство Пользователя для Lorex Technology SG19LD800 Series

Camera Menu

Displays the settings for Brightness, 
Contrast, Tint and Color for individual 
cameras.

• Press the ENTER Button and select a 

camera. 

• Set the Brightness, Contrast, Tint and 

Color for each camera. These settings 
can be set to a range of 
1(low)~100(high)

• Press the RETURN button to return to 

the Camera Color Setup screen.

PTZ Setup is for PTZ Type Cameras ONLY, 
which are not included with this system. For 
more information on PTZ Cameras, visit us 
on the web at http://www.lorexcctv.com.

• Address - Select the physical address 

location of the PTZ Camera (as 
connected to the rear PTZ Control 
Block. Refer to page 74 for details). 

• PTZ Protocol - Select the Protocol for 

the PTZ Camera. See the list of 
compatible protocols below. Consult the 
Owners Manual of the PTZ Camera for 
further details.

•  Baud Rate - Setup for the PTZ 

Communication Speed: (2400, 4800, 
9600,19200, 38400 BPS)

 

Samsung (MRX-1000), Samsung(SCC641), Honeywell(SD1), Honeywell (GMC), Lilin(Fastdome), Fastrax(?), 
GC(655N), D-MAX, Sunin DSC-230, Scan Dome-?, Vicon, Philips8560-700, Sensormatic, Panasonic(WV-CS850), 
Panasonic(WV-CSR604), VRX-210 Kalatel(KTD-312), PELCO-D, PELCO-P, & Dynacolor(D7722).

Press to enter the Detailed PTZ 
Properties screen.