Руководство Пользователя для Lorex Technology SG19LD800 Series
46
Event / Sensor
ALARM INPUT
Configurations for any external alarm device
(i.e. a Door or Window Sensor). Refer to
page 73 for hardware configuration details.
(i.e. a Door or Window Sensor). Refer to
page 73 for hardware configuration details.
• Operation - Sets the Alarm Sensor
Connection Status (Enable / Disable) for
an external alarm (i.e. Door or Window
Sensors). Refer to page 73 for setup
diagram.
an external alarm (i.e. Door or Window
Sensors). Refer to page 73 for setup
diagram.
• Type: Sets the Alarm Sensor type to N/
O (Normally Open) or N/C (Normally
Closed).
Closed).
z
N/O (Normally Open) - Select for an
Alarm that has a Normally Open circuit (such
as a door that remains open). An Alarm will
occur when this is changed to a Closed
status.
as a door that remains open). An Alarm will
occur when this is changed to a Closed
status.
z
N/C (Normally Closed) - Select for an
Alarm that has a Normally Closed circuit
(such as a Window Sensor). An Alarm will
occur when this is changed to a Opened
status.
(such as a Window Sensor). An Alarm will
occur when this is changed to a Opened
status.
ALARM OUT
Sends an Alarm Out signal to a device (such
as a Manual Door or independent Light/
Buzzer Alarm) when an Alarm In event is
detected
as a Manual Door or independent Light/
Buzzer Alarm) when an Alarm In event is
detected
• Channel - Select a Channel to configure.
• Mode - Setup Reacted Relay as either
Latched or Transparent Mode:
z
Latched – When sensor alarm activated,
relay reacted in setup duration.
z
Transparent – Relay reacted temporary
during sensor alarm activate.
• Type - Set the Relay Type to either N/O
(Normally Open) or N/C (Normally
Closed).
Closed).
• Operation - Setup Relay Connect with
Alarm Sensor to either Enable or
Disable.
Disable.