Справочник Пользователя для Lucent Technologies Definity Enterprise Communication Server 8.2
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1019
Trunk Group
17
Pause (msec)
THis field is administrable only if the Trunk Signaling Type field is blank. All
CO, DIOD, and tie circuit packs that accept administrable timers accept this timer.
However, this timer is sent only to the following circuit packs: TN464B (or later),
TN767, TN436B, TN459B, TN2146, TN2199, and TN2242, and TN429 and
TN2184 ports in a DID trunk group.
CO, DIOD, and tie circuit packs that accept administrable timers accept this timer.
However, this timer is sent only to the following circuit packs: TN464B (or later),
TN767, TN436B, TN459B, TN2146, TN2199, and TN2242, and TN429 and
TN2184 ports in a DID trunk group.
PPS
NOTE:
The TN439, TN458, TN497, TN747Bv12 (or later), and TN767 circuit
packs only send rotary pulses at 10 pps.
packs only send rotary pulses at 10 pps.
Make (msec)
Valid entries
Usage
20
to
2550
in
increments of
10
10
Enter the minimum acceptable interval (pause) between DTMF
tones sent from a hybrid phone.
tones sent from a hybrid phone.
Valid entries
Usage
10
Enter the rate (pulses per second) at which outgoing rotary
pulses are sent over this trunk group.
pulses are sent over this trunk group.
20
Valid entries
Usage
Enter the duration of the make interval (the pause between pulses) while the
system is outpulsing digits using dial pulse signaling. The field cannot be blank.
system is outpulsing digits using dial pulse signaling. The field cannot be blank.
20
to
80
in
increments of 5
If the PPS field is
10
, the sum of the Make (msec) and Break
(msec) fields must equal 100.
10
to
40
in
increments of 5
If the PPS field is
20
, the sum of the Make (msec) and Break
(msec) fields must equal 50.