Справочник Пользователя для LOEWE Spheros R 37Full-HD+

33 -

6

 Select software type: 

    Select TV base software or
   DVB software,
 OK start search.

If new versions are available then a subsequent screen
message will be displayed.

➠ 

New software available via search.

➠ 

If a new TV and a new DVB software is available in the

automatic  search  for  new  software  versions,  you  can
select the software type to be updated.

6

Select update option:

Load new software after switch off to standby 
(update after switching off)

Keep current software (no update desired)

 OK more or exit wizard.
 OK start software update.

A bar is displayed to inform you about the progress of the
load process. During the loading process do not switch
off your device via the mains switch! This may last up to
20 minutes. You will be informed when it is finished.

At the end of loading:
Turn off the TV set off with the mains switch and turn it
on again. This is not necessary when loading the software
with the update option Load new software after switch 

off to standby mode.

If a new software has not been updated via satellite, you
will be reminded of this several times when switching on
the set.

TV base software and DVB software
To ensure that your TV set is always up to date from time to time Loewe
will make updated TV base software and DVB software versions available.
These updates are broadcast via satellite (at present only via ASTRA1),
or they can be installed on your set via a USB stick. Please contact your
dealer for a software update via USB stick.

Automatic search for new software via satellite
The  set  automatically  determines  whether  a  new  software  version  is
available per satellite during the night when the EPG data are updated.
However the TV set must remain in standby mode for this (do not switch
off the set with the mains switch).
If a new software version has been found, the set informs you with an
on-screen  message  the  next  time  it  is  switched  on  (see  right  column
– Loading new software).

Manual search for new software via USB /satellite
If it is not automatically displayed that a new software is available when
switching on the set, you can also run a manual search.
The system first checks whether a software update is available on an in-
serted USB stick. If not the system will search for an update via satellite.

Call TV menu.

34 Select Settings,
 6 go to the menu line below.
34

Select Miscellaneous,

 6 go to the menu line below.
34

Select Software update.

 OK   calls software update wizard.

The software versions currently loaded in the set
are listed.

Software update
Update options

Software update wizard
A new software is available.

TV base software:                  current V2.1.0         new V2.1.1

Please specify whether and, if so, when you want to load the new software.

Load new software now

Load new software after switch off to standby 

Keep current software

END

OK

OK

Proceed

Software update
Software type

Software update wizard
Current TV base software:               V2.1.0

Current DVB software:                  V1.3.0 

You can now search for new software. Please select the software type and

start the search with the     button.

TV base software

DVB software

OK

END

OK

OK

Proceed