Справочник Пользователя для Linear AM3Plus
3
Hardware Features
✓ FOUR FORM “C” (N.O. & N.C) RELAYS
Each relay has 3-amp @ 24-volt rating with a status indicator and relay latching pushbutton
✓ FOUR REQUEST-TO-EXIT INPUTS
Activates access device for exiting using a hardwired switch
✓ FOUR SENSING INPUTS
For sensing door position to control door-ajar and alarm features, or for access inhibit timer
✓ NINE STATUS INDICATORS
Display access, reader, and system information
✓ OPTIONAL MODEM
Compatible with the Model ACM-1 plug-in modem for telephone communications with system
✓ RS-232 COMMUNICATIONS PORT
RS-232 port for direct connection to printer or computer
✓ NETWORK SUPPORT
Multiple units can be connected together to share data
✓ EXPANSION INTERFACE SUPPORT
Model AM-MIO accessory adds additional input and outputs to the AM3Plus
✓ ON-BOARD CLOCK/CALENDAR CIRCUIT
Stamps the event log data as it is stored in the system’s memory
✓ WIEGAND INPUTS
Two Wiegand format card reader inputs for connection to external devices
✓ LINEAR PBUS SUPPORT
Two PBUS input/output ports for connection to Linear accessories
✓ BACKUP BATTERY SUPPORT
Built-in backup battery charging circuit
✓ POWER FAILURE MONITOR
AC power input is monitored, power outages are recorded in the event log
Software Highlights
✓ COMPUTER PROGRAMMABLE
No dedicated programmer required, program with a computer and a modem
✓ LARGE ENTRY CODE CAPACITY
Up to 20,000 entry codes can be used for gaining access
✓ 2-8 DIGIT ENTRY CODE LENGTH
Flexible code length for different applications
✓ LARGE TRANSMITTER CAPACITY
Up to 45,600 block coded and 20,000 individually enrolled
Linear transmitters can be used for gaining access
Linear transmitters can be used for gaining access
✓ TRANSMITTER FACILITY CODE SUPPORT
Identifi es wireless transmitters by installation
✓ LARGE CARD CAPACITY
Up to 45,600 block coded and 20,000 individu-
ally enrolled cards can be used for gaining access
ally enrolled cards can be used for gaining access
✓ FOUR INDEPENDENT RELAY CHANNELS
Each output’s action is programmable
✓ PROGRAMMABLE TIME SCHEDULED RELAY ACTIVATION
Activation for up to four time periods for each of the 31 system time zones
✓ PROGRAMMABLE TIME ZONE ACCESS VALIDATION
Validation during four time periods for each of the 31 system time zones
✓ PROGRAMMABLE VALIDATION DAYS
Select days of the week access is allowed
✓ PROGRAMMABLE HOLIDAY DAYS
Select up to 24 expiring & 24 non-expiring holidays for access restriction
✓ OBSTACLE TRANSMITTER SUPPORT
Compatible with Linear’s Model MGT transmitter
✓ EVENT LOG
Stores up to 20,000 system events in memory for record keeping
✓ DELETED CARDHOLDER DATABASE
System logs deleted cardholders for future identifi cation
✓ TIMED OR TRUE ANTI-PASSBACK
Options to temporarily disable a cardholder’s credentials after access for
a preset time or depending on the cardholder’s access direction
a preset time or depending on the cardholder’s access direction
Feature Overview
Relay Outputs
Four 3-amp dry contact relay outputs are provided to activate four access
devices, such as door strikes, magnetic locks, automatic doors, barrier gates,
and automatic sliding gates. The relay outputs can also be used for alarm
contact shunting, operator obstacle triggering, and alarm activation. Each of
the four relays can also be manually activated from buttons on the front of the
AM3Plus. LED indicators display the status of each relay.
devices, such as door strikes, magnetic locks, automatic doors, barrier gates,
and automatic sliding gates. The relay outputs can also be used for alarm
contact shunting, operator obstacle triggering, and alarm activation. Each of
the four relays can also be manually activated from buttons on the front of the
AM3Plus. LED indicators display the status of each relay.
Request-to-Exit Inputs
Each relay channel has a request-to-exit input. These inputs are supplied for
hardwire activation of the access devices. Typically a request-to-exit input is
wired to a pushbutton inside of the access controlled area. When a person
desires to exit, pressing the pushbutton will activate the output relay channel
and trigger the access device. A loop detector for automatic gate operation
can be connected to a request-to-exit input.
hardwire activation of the access devices. Typically a request-to-exit input is
wired to a pushbutton inside of the access controlled area. When a person
desires to exit, pressing the pushbutton will activate the output relay channel
and trigger the access device. A loop detector for automatic gate operation
can be connected to a request-to-exit input.
Sensing Inputs
The sensing inputs connect to door switches that monitor whether the
controlled door is open or closed. The sensing inputs may alternately be
programmed as “access inhibit” inputs for use with an external timer or service
switch.
controlled door is open or closed. The sensing inputs may alternately be
programmed as “access inhibit” inputs for use with an external timer or service
switch.
Optional Modem
A modular connector is provided for telephone line connection to the unit’s
optional 33.6K baud modem. The system can be accessed remotely for
programming and control over the standard telephone system using a
personal computer with a modem. For system backup, a computer connected
through the modem can store and retrieve the AM3Plus memory data.
optional 33.6K baud modem. The system can be accessed remotely for
programming and control over the standard telephone system using a
personal computer with a modem. For system backup, a computer connected
through the modem can store and retrieve the AM3Plus memory data.
RS-232 Communications Port
A modular connector is provided for the bi-directional 38.4K baud RS-232
port. The AM3Plus RS-232 port connects to a personal computer’s COM port.
System programming can be performed locally with a computer connected to
the RS-232 port.
port. The AM3Plus RS-232 port connects to a personal computer’s COM port.
System programming can be performed locally with a computer connected to
the RS-232 port.
Obstacle Detection
Linear’s Model MGT safety edge transmitter is compatible with the AM3Plus.
The MGT detects and transmits obstacle events to a remote receiver
connected to the AM3Plus.
The MGT detects and transmits obstacle events to a remote receiver
connected to the AM3Plus.
Programming Memory
The AM3Plus fl ash memory retains all entry codes, transmitter information,
card access, and programming, even without power.
card access, and programming, even without power.
Battery Backup
The system supports a 12-volt battery backup for operation during power
outage. The system will charge the backup battery when AC power is
present.
outage. The system will charge the backup battery when AC power is
present.
Network Support
Multiple AE1000Plus, AE2000Plus, & AM3Plus units can be networked
together via three-wire RS-485 cables or through modems allowing
information sharing between the units. A common event log is retained for all
of the networked units.
together via three-wire RS-485 cables or through modems allowing
information sharing between the units. A common event log is retained for all
of the networked units.
Linear PBUS Ports
Two 6-wire Linear PBUS input/output ports are available to connect to
several accessories (keypads, proximity readers, remote receivers). A typical
application for a remote keypad or reader would be to control additional doors
or gates.
several accessories (keypads, proximity readers, remote receivers). A typical
application for a remote keypad or reader would be to control additional doors
or gates.