Справочник Пользователя для Lanier 2001
RX Operation
Facsimile Programming
4 - 33
Continuous Poll RX
Poll the specified location with pre-set timer. Up to 10 groups can be set for polling, and
each group can set 10 locations.
each group can set 10 locations.
1
Press the PROGRAM Key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.
menus until you reach the RX Operation Menu.
Press YES to begin programming.
2
Press 10 or scroll down to the Continuous Polling
RX menu and press YES.
RX menu and press YES.
3
Enter the Poll Group number you will to assign to
this group and press YES.
this group and press YES.
4
The next screen indicates that this Poll Group is not
active. Press YES to continue.
active. Press YES to continue.
5
Select a start day to begin polling. Press YES to
continue.
continue.
6
Select a stop day to finish polling. Press YES to
continue.
continue.
7
Enter a start time to begin polling. Press YES to
continue.
continue.
8
Enter a stop time to finish polling. Press YES to
continue.
continue.
9
Enter the number of minutes between each redail.
Press YES to continue.
Press YES to continue.
10
Enter the remote fax number to be polled.
11
Press YES to continue.
RX OPERATION?
YES / or 1-9
10 CONTI. POLLING RX?
OK=YES
POLL GROUP NO.=_1
OK=YES /or 01-10
POLL GROUP 01 =OFF
OK=YES(Fin.=START)
SEL. START DAY=SUN.
OK=YES / or 0-6
SEL. STOP DAY=SUN.
OK=YES / or 0-6
START TIME=_0:00
OK=YES (DEL=NO)
STOP TIME=_0:00
OK=YES (DEL=NO)
REDIAL TIME=1 Min.
OK=YES / or 1-8
ENTER POLLING FAX NO.
NO.001=_
OK=YES (DEL=NO)