Справочник Пользователя для Iveco S30 ENT M23
installation directiVe
1
MAY 2006
S30 ENT M23
Figure 12
1
4
5
9
06_012_S
12
3
2
13
6
7
10
8
11
The electrical equipment of the engine comprises a series
of components provided separately from the engine to
enable an easy and diversified installation, according to the
Yard’s design choices. The need to make accessible, at sea or
underway, the controls to the electrical components and to
the connector for diagnostics contained in the relay box may
be met through different installation arrangements.
Along with the coupling of all connectors provided in the
wire harnesses, completing the installation also requires the
connecting wire harness to the connector JFC (11) for the
fuel filter, to complete the power line and to connect the
accumulator to the engine wire harness.
NOTE
the two general power supply terminals identified as
+Batt and −Batt must be connected to the accumula-
tor, while the terminal identified as +Batt/cc must be
connected to the +0 pole of the starter motor.
9. ELECTRICAL EQUIPMENT
1. Engine wiring - 2. +BATT/CC terminal - 3. Power line for electric starter motor and alternator - 4. Indicator and control panel - 5.
Extension harness - 6. Engine pre-heating glow plugs electronic control unit - 7. Fuse holder for the engine pre-heating glow plugs
electronic control unit - 8. ECU EDC connectors - 9. Relay box - 10. Diagnostic tool connector - 11. Harnessing to be made by
construction site personnel - 12. Fuel filter support - 13. Fuel electric pump