Справочник Пользователя для I.R.I.S. Touch 200
Iris Touch 200 Range Dialer Installation Manual
15
Conformance
The IRIS range of alarm dialers comply with the following European Directives:
•
1999/5/EC (Radio & Telecoms Terminal Equipment Directive).
•
72/23/EEC (Low Voltage Directive).
•
89/336/EEC (Electromagnetic Compatibility Directive as amended by
92/31/EEC).
92/31/EEC).
Conformance to EN50131 and EN50136
The IRIS dialers are compatible with the requirements of European standards
prEN50131-1 (Alarm Systems – Intrusion and hold-up systems Part 1: System
Requirements) (dated Feb 2004) and EN50136-1-1 (Alarm Systems – Alarm
transmission systems and equipment) (January 1998 with Amendment 1 August
2001) as follows:
The IRIS dialers are compatible with the requirements of European standards
prEN50131-1 (Alarm Systems – Intrusion and hold-up systems Part 1: System
Requirements) (dated Feb 2004) and EN50136-1-1 (Alarm Systems – Alarm
transmission systems and equipment) (January 1998 with Amendment 1 August
2001) as follows:
•
The IRIS dialers conform to Environmental Class II.
•
The IRIS dialers are compliant to ATS 6 compatible with Security
Grade 4.
Grade 4.
Safety
Care should be taken when interconnecting telecommunications equipment that
only like interfaces are interconnected to avoid safety hazards.
only like interfaces are interconnected to avoid safety hazards.
SELV:
SELV (Safety Extra-Low Voltage) is defined as a secondary circuit
which is so designed and protected that under normal and single fault
conditions the voltage between any two accessible parts does not
exceed a safe value (42.4V peak or 60V dc maximum).
which is so designed and protected that under normal and single fault
conditions the voltage between any two accessible parts does not
exceed a safe value (42.4V peak or 60V dc maximum).
The interfaces on the IRIS dialer have the following safety classifications:
•
Dialer Interface: SELV suitable for connection to the TNV interface of a
single line telecommunications equipment such as telephones, faxes,
etc.
single line telecommunications equipment such as telephones, faxes,
etc.
•
Data Interface: SELV suitable for connection to the SELV interface on a
data terminal such as a PC COM port.
data terminal such as a PC COM port.
•
Power Interface: SELV for connection to a DC supply.
•
Inputs and Outputs: SELV for connection to alarm output and input
pins.
pins.