Справочник Пользователя для Inter-Tel INT1400
14
INT1400 Cordless Telephone User Guide
Installing the Handset Battery Pack
To install the battery pack:
1.
Remove the battery cover by press-
ing the latch and sliding the cover
down and off of the handset.
ing the latch and sliding the cover
down and off of the handset.
2.
Connect the battery pack connec-
tor, observing correct polarity to
the jack inside the battery compart-
ment, as shown on the right.
tor, observing correct polarity to
the jack inside the battery compart-
ment, as shown on the right.
NOTE:
Do not exert any force on
this connection. It could cause dam-
age to the battery or handset. Once
you are certain that you have made
a good connection, then insert the
battery pack into the battery com-
partment. Do not pinch the wires.
age to the battery or handset. Once
you are certain that you have made
a good connection, then insert the
battery pack into the battery com-
partment. Do not pinch the wires.
3.
Replace the cover and slide it up
until it latches into the handset.
until it latches into the handset.
BATTERY COVER