Справочник Пользователя для Invacare Electric Portable Patient Lift RPA600-1E
SECTION 7—MAINTENANCE
28
The Invacare Patient Lift is designed to provide a maximum of safe, efficient and
satisfactory service with minimum care and maintenance.
satisfactory service with minimum care and maintenance.
All parts of the Invacare Lift are made of the best grades of steel, but metal to metal
contact will wear after considerable use.
contact will wear after considerable use.
There is no adjustment or maintenance of either the casters or brakes, other than cleaning,
lubrication and checking axle and swivel bolts for tightness. Remove all debris, etc. from
the wheel and swivel bearings. If any parts are worn, replace these parts immediately.
lubrication and checking axle and swivel bolts for tightness. Remove all debris, etc. from
the wheel and swivel bearings. If any parts are worn, replace these parts immediately.
If you question the safety of any part of the lift, contact your Dealer immediately and
advise him/her of your problem.
advise him/her of your problem.
Lubricating the Lift
NOTE: For this procedure, refer to FIGURE 7.1.
The Invacare lift is designed for minimum maintenance. However, a six month check and
lubrication should ensure continued safety and reliability.
lubrication should ensure continued safety and reliability.
Keep lift and slings clean and in good working order. Any defect should be noted and
reported to your dealer as soon as possible.
reported to your dealer as soon as possible.
The casters MUST swivel and roll smoothly. A light grease (waterproof auto lubricant)
may be applied to the ball bearing swivel of the casters once a year. Apply more
frequently if the casters are exposed to extreme moist conditions.
may be applied to the ball bearing swivel of the casters once a year. Apply more
frequently if the casters are exposed to extreme moist conditions.
Refer to FIGURE 7.1 for lubrication points. Lubricate all pivot points. Wipe all excess
lubricant from lift surface.
lubricant from lift surface.
1. Swivel Bar
2. Boom Mounting Bracket
3. Boom/Mast Mount
4. Mast Mounting Bracket
FIGURE 7.1 Lubricating the Lift
1
2
3
4