Справочник Пользователя для Integra DTA-70.1

15

The FRONT L/R and SURR BACK L/R outputs can be used with front speakers and surround back speakers respec-
tively, or bi-amped to provide separate tweeter and woofer feeds for a pair of front speakers that support bi-amping, 
providing improved bass and treble performance.

Notes:
• Please make sure that your AV controller supports bi-amping.
• When bi-amping is used, the amplifier is able to feed up to 7-channel speakers in the main room.
• When bi-amping is used, surround back speakers cannot be used.
• For bi-amping, the FRONT L/R outputs feed the front speakers’ woofer terminals. And the SURR BACK L/R outputs 

feed the front speakers’ tweeter terminals.

• Once you’ve completed the bi-amping connections shown below, you must turn on the AV controller and configure 

it to enable bi-amping. For more details, see the instruction manual of the connected component.

• You can also use unbalanced (RCA) connections for bi-amping.
Important:
• When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter 

• Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual.

Surround right 

speaker

Front right speaker

Center speaker

Front left speaker

Surround left 

speaker

Tweeter (high)

Woofer (low)

Front high/wide 

right speaker

Front high/wide 

left speaker

DTA-70.1_En_100108.book  Page 15  Friday, January 8, 2010  2:04 PM