Справочник Пользователя для Insignia NS-1DRVCR

Скачать
Страница из 108
11
www.insignia-products.com
Connecting to an amplifier
To connect two-channel analog stereo or 
Dolby Pro Logic II/Pro Logic:
Connect the Left and Right AUDIO OUT (or 
AV AUDIO OUT) jacks on the recorder to the 
audio left and right in jacks on your amplifier, 
receiver, or stereo system using the audio 
cables supplied.
To connect a two channel digital stereo or 
A/V receiver with multi-channel decoder:
Connect one of the recorder’s DIGITAL 
AUDIO OUT jack (coaxial) to the 
corresponding in jack on your amplifier. Use 
an optional digital (coaxial) audio cable.
Activate the recorder’s digital output. (See 
Digital multi-channel sound
A digital multi-channel connection provides the 
best sound quality. For this you need a 
multi-channel audio/video receiver that supports 
one or more of the audio formats supported by 
your recorder, including MPEG 2, Dolby Digital 
and DTS. Check the receiver manual and the 
logos on the front of the receiver to verify this.
Manufactured under license from Dolby Laboratories. 
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks 
of Dolby Laboratories.
“DTS” is a trademark of Digital Theater Systems, Inc.
Accessory audio/video (A/V) connections
To connect the recorder to an accessory 
component:
Connect the AV IN 1 or AV 2 IN jacks on the 
recorder to the audio/video out jacks on your 
accessory component, such as a VCR or 
camcorder, using the optional audio/video 
cables. (Refer to “Recording from DV input” 
on page 21.)
Connecting a digital camcorder
Use a DV cable (not supplied) to connect the 
DV in/out jack of your DV digital camcorder to 
the front panel DV IN jack of your recorder.
Note
If the audio format of the digital output does not 
match the capabilities of your receiver, the 
receiver will produce a strong, distorted sound 
or no sound at all.
To play six-channel digital surround sound 
though a digital connection, your receiver must 
have a Digital Multi-channel decoder.
To see the audio format of the current DVD 
displayed on the screen, press AUDIO.
Your recorder does not perform internal 
(2-channel) decoding of a DTS sound track. To 
enjoy DTS multi-channel surround, you must 
connect your recorder to a DTS compatible 
receiver through one of your recorder’s digital 
audio outputs.
R
L
AUDIO INPUT
DIGITAL INPUT
COAXIAL
Digital 
coaxial 
cable
Audio 
cable
Note
This jack is for connection to DV equipment only. It 
is not compatible with digital satellite tuners or 
D-VHS video decks.
or
Jack panel of component
DV
IN/OUT
Front of recorder
DV digital camcorder
DV cable (not supplied)