Справочник Пользователя для Insignia NS-1DRVCR

www.insignia-products.com

4 Press 

 to select the second option you 

want, then press 

 to move to the third 

level.

5 Press 

 to select the setting you want, 

then press ENTER to confirm your selection. 
Some items require additional steps.

6 Press 

 RETURN or HOME to exit the 

Setup menu.

Some DVDs require specific operation or allow 
only limited operation during playback. When 
this occurs, 

 

is displayed, action prohibited or 

not available.

Press 

 to go back to the previous level.

Clock Set–You can manually or automatically 
(using XDS) set the clock.
TV Aspect–You can select from 4:3 Letter box, 
4:3 Pan scan, or 16:9 Wide.
Power Save Mode–You can set Power Save 
Mode to ON to enable an economic power 
save mode.
Factory Set–You can reset your recorder to 
original factory settings.

Display Menu–You can select a language for 
the setup menu and information display.
Disc Menu–You can select a language for the 
DVD menu.
Disc Audio–You can select a language for the 
DVD audio.
Disc Subtitle–You can select a language for 
the DVD subtitle.

Dolby Digital/DTS/MPEG–You can select 
Bitstream (if you connect to equipment with 
Dolby Digital, DTS, or MPEG decoder), or PCM 
(to automatically downmix to two-channel 
PCM audio).
Sampling Freq.–You can select 96 kHz or 48 
kHz (if your receiver or amplifier is not capable 
of decoding 96 kHz signals).
DRC (Dynamic Range Control)–You can set 
the DRC to On if you want to listen to a movie 
at a lower volume, without losing clarity.

Rating–You can select the rating restrictions 
for your DVD player. Ratings are 1–8 (1 is the 
most restrictive). When you select this option, 
you must enter a password.
Set Password–You can enter or change your 
password.
Note: If you forget your password, you can 
clear the password by going to the Setup 
menu, selecting Start, then pressing ENTER. 
Input the six-digit number (210449), select OK 
when the message appears, then press 
ENTER. The password is cleared.
Area Code–You can enter the area code whose 
standards were used to rate the DVD (see 
“Area code list” on page 28).

Disc Record Mode–You can set the picture 
quality for recording a DVD. (XP=excellent, 
SP=standard, LP= low, EP=extended.)
VCR Record Mode–You can set the picture 
quality for recording a video tape. 
(SP=standard, SLP=long play.)
DV Record Audio–You can set this to choose 
which of two digital camcorder soundtracks to 
use. Audio 1 (to use the sound that was 
recorded when a recording was made), or 
Audio 2 (to use the overdubbed sound).
Auto Chapter–You can set the auto chapter 
markings (made during recording) to 5 minute 
intervals, 10 minute intervals, or None.

Initialize–Formats a DVD for recording. For 
DVD-RWs, you can choose VR Mode or Video 
Mode. For DVD+RWs you can choose OK.
Caution: If you change the format of a DVD, 
the disc is erased.
Finalize–Fixes the recordings in place so the 
DVD can be played on a regular DVD player or 
a computer with a suitable DVD-ROM drive.
Caution: If you finalize a DVD-R or DVD+R, 
you cannot edit or record anything else on the 
disc.
Disc Label–You can enter a name for the DVD. 
See “Naming a title” on page 24 for 
information on using the Keyboard menu.
Disc Protect–You can protect recordings, 
depending on the type of DVD you are using. 
For DVD+RWs, it prevents editing, erasing, 
overwriting, or regular recording. For DVD+Rs 
or DVD-RWs (VR mode), it prevents editing, 
erasing, and regular recording. It is not 
compatible with DVD-RWs in Video mode or 
DVD-Rs. To unlock a DVD, select OFF.
AutoPlay–Turning this ON will bypass the Disc 
menu and trailers and start playing the movie 
automatically.