Справочник Пользователя для InSciTek Microsystems Allworx Phone

Phone Guide

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

trademarks or registered trademarks of their respective owners.

Revised: March 28, 2007

Page 1

Congratulations! You’re the new owner of an Allworx

9102 or 9112 VoIP phone. This phone will make it easy

for you to place and receive calls when using the Allworx System.

1 Getting

Started

1.1 What is in the box?

Check out the contents of the box your phone came in. You should have:

•  Allworx 9102 or 9112 phone
•  Power supply
•  Handset with cord

Not included, but will also need:

• Ethernet cable to connect the phone to the network

1.2 Connecting the Phone

We’ve taken all the challenge out of connecting your phone properly. Follow these steps to connect:

1. Plug one end of the Ethernet cable into the Network jack on the back of the phone. Plug the other end

into your Ethernet jack on the wall.

WARNING: Do not connect to an analog phone line.

2. The phone contains a PC jack. A computer may be connected to the network through the phone’s

Computer port.

3. If you’re using Power over Ethernet (PoE), the power to the phone was supplied when you connected

the Ethernet cable. If this is the case, skip to step 5.

4. If you’re not using PoE, connect the power cable into the phone, then plug the other end into an outlet.

It’s a good idea to use a surge protector.

5. After applying power, the phone will initialize itself. You can watch its progress on the phone’s screen.

A normal sequence would include:

a. Allworx Logo appears.

b. Starting

network.

c. Loading configuration files.

d. Station Init complete.

e. After successful startup, the phone will display date, time, your presence, your name, and

extension.

If the phone does not follow this sequence or displays an error, contact your System
Administrator.