Справочник Пользователя для Infortrend A12U/A08U-G2421

Chapter 5: System Maintenance 

 Step 1. 

To remove the cooling fan module: Squeeze both side latches 

towards the center of the cooling fan module and gently withdraw 

the cooling fan module from the subsystem by gently pulling on the 

silver handle at the bottom. (See Figure 5- 10). 

 

 

 Step 2. 

Install the new cooling fan module: Line the new module up with 

the slot into which it will be inserted and then gently push it into the 

chassis. The latches will hold the module in place.  

 

5.7  Drive Tray Maintenance 

 

Hot-swappable drive trays: The drive trays are all hot-swappable. If a hard drive fails, it 

can be replaced while the subsystem is still running. 

 

Forearm handles: If the hard drive is behind either the left or right forearm handle, make 

sure that the locking mechanism on the side of the handle is first released prior to 

opening the handle itself. (See Figure 5- 11) The locking mechanism must also be 

released in order to close the handle. Therefore, after the new drive has been installed, it 

will be necessary to release the locking mechanism on the handle prior to closing it. For 

more information, please refer to Section 1.5 in Chapter 1.