Справочник Пользователя для Infortrend EONSTOR A16E-G2130-4

 

 

This chapter briefly introduces the A16E-G2130-4 iSCSI-to-SATA-II 

storage subsystem. The A16E subsystem comes with four (4) GbE host 

ports capable of large I/O transfers over iSCSI packets.  

Infortrend’s iSCSI storage 

supports network initiators 

compatible with the IETF iSCSI 

standard (RFC 3720) with the 

following functionalities: 

 

 

  Access control via 

IQN and IP 

  CHAP security 
  Jumbo frames 
  Header Digest mode 

Internet SCSI (iSCSI) protocols are embedded in firmware and I/Os are 

rapidly processed via dedicated algorithms. The iSCSI storage is built 

around reliable hardware and sophisticated RAID technologies. I/O requests 

are packaged and transmitted over local area networks (LANs), wide area 

networks (WANs), or the Internet using the existing networking hardware 

and thus the total cost of ownership is reduced. With the help of the 

networking flexibility, the subsystem is ideal for location-independent data 

storage, backup, and retrieval.  

The subsystem delivers extreme performance that results from the combined 

performance of multiple disk drives and the level of data protection unseen 

in other iSCSI storages. Featuring all standard RAID functionalities as other 

EonStor subsystems, the A16E subsystem provides a reliable platform for 

IT operations such as backup, data-mining, or strategic allocation.   

This subsystem features a high-density architecture that supports up to 

sixteen (16) hot swappable, SATA-II hard drives in a 3U-profile chassis. 

The subsystem is powered by a RAID controller board featuring the latest 

ASIC400, RAID6 ASIC as the XOR engine. The pre-installed 512MB DDR 

RAM DIMM module can be upgraded to a 2GB capacity DIMM to support 

complicated applications that hold numerous ID/LUN combinations.  

Product Overview      

              

 

1-1