Справочник Пользователя для ICOM iM504
13
4
SCAN OPERATION
4
■ Setting TAG channels
For more efficient scanning, add the desired channels as TAG
channels or clear the TAG for unwanted channels.
Channels that are not tagged will be skipped during scanning.
TAG channels can be assigned to each channel group (USA,
INT, CAN) independently.
channels or clear the TAG for unwanted channels.
Channels that are not tagged will be skipped during scanning.
TAG channels can be assigned to each channel group (USA,
INT, CAN) independently.
q While pushing and holding [H/L], push [CH/WX•DUAL•U/I/C]
to select the desired channel group (USA, INT or CAN.)
w Select the desired channel to be set as a TAG channel.
e Push [SCAN•TAG] for 1 sec. to set the displayed channel
e Push [SCAN•TAG] for 1 sec. to set the displayed channel
as a TAG channel.
• “T
TA
AG
G” appears in the display.
r To cancel the TAG channel setting, repeat step e.
• “T
TA
AG
G” disappears.
✔ Clearing (or setting) all tagged channels
While pushing and holding [H/L], push [SCAN•TAG] for 3
sec. (until a long beep changes to 2 short beeps) to clear all
TAG channels setting in the channel group.
While pushing and holding [H/L], push [SCAN•TAG] for 3
sec. (until a long beep changes to 2 short beeps) to clear all
TAG channels setting in the channel group.
• Repeat above procedure to set all TAG channels.
■ Starting a scan
Set scan type (Priority or Normal scan) and scan resume
timer in advance, using Set mode. (p. 55)
timer in advance, using Set mode. (p. 55)
q While pushing and holding [H/L], push [CH/WX•DUAL•
U/I/C] to select the desired channel group (USA, INT,
CAN) if desired.
CAN) if desired.
w Set TAG channels as described at left.
e Make sure the squelch is closed to start a scan.
r Push [SCAN•TAG] to start Priority or Normal scan.
e Make sure the squelch is closed to start a scan.
r Push [SCAN•TAG] to start Priority or Normal scan.
• “P
PR
RI
I-
-S
SC
CA
AN
N 1
16
6” appears at the channel comment indicator
during Priority scan.
• “N
NO
OR
RM
MA
AL
L S
SC
CA
AN
N” appears at the channel comment indicator
during Normal scan.
• When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to Set mode
setting. (Channel 16 is still monitored during Priority scan.)
setting. (Channel 16 is still monitored during Priority scan.)
• Rotate [DIAL] to check the scanning TAG channels, to change
the scanning direction or resume the scan manually.
• A beep tone sounds and “1
16
6” blinks at the channel comment in-
dicator when a signal is received on Channel 16 during Priority
scan.
scan.
Push
Scan starts.
When a signal is received
25W
25W
INT
INT
DUP
DUP
34
34°34.506N
34.506N
123
123°23.236W
23.236W
UTC
UTC 12
12:00
:00
INTL
INTL
BUSY
BUSY 25W
25W
INT
INT
DUP
DUP
NORMAL
NORMAL SCAN
SCAN
34
34°34.506N
34.506N
123
123°23.236W
23.236W
UTC
UTC 12
12:00
:00
SAFETY
SAFETY
25W
25W
INT
INT
DUP
DUP
TAG
TAG
NORMAL
NORMAL SCAN
SCAN
34
34°34.506N
34.506N
123
123°23.236W
23.236W
UTC
UTC 12
12:00
:00
[Example]: Starting a normal scan.