Справочник Пользователя для IBM LXE MX5

If the MX5 has a dead main battery and is as cold as the extended operating 

temperature’s lowest value, the unit must be warmed to above –20°C (-4°F) 

before installing a new main battery pack and pressing the On button. 

Note:  Refer to the section titled "Power Modes" in the “MX5 Reference Guide” 

for information relating to the power states of the MX5. 

The Power key is located next to the <Z> key on the keypad. When a battery is 

inserted in the MX5 for the first time press the Power key. 
Tapping the Power key places the MX5 immediately in Suspend mode. Tapping 

the Power key again, or connecting to AC power, immediately returns the MX5 
from Suspend. 

When the Pocket PC desktop is displayed or an application begins, the power up 

(or reboot) sequence is complete. If you have previously saved your settings, 
they will be restored on reboot. Application changes are saved when OK is 

clicked on an application applet. 

Hold down the Power key and the Orange key for 4+ seconds until the display 

blanks, then release the keys. A warm reset does not affect the operating system 
and no data loss occurs.  

Hold down the Power key, the Blue key and the Orange keys for 4+ seconds.  
The following steps will need to be performed when the MX5 powers on again: 
1.  Calibrate the touch screen. 

2.  Set the geographical Location. 

3.  Set the date and time.