Справочник Пользователя для ICP DAS USA IM-100

24mA. An output voltage between 4.2 and 5.0VDC indicates a logical 1. 

 output voltage (i.e., 4.2VDC) will be present when 

rcing the maximum allowed output current of 24mA. 

an example of a typical circuit that you can use to monitor an 

output port with a LED or an Opto-coupler. Note that current in the circuit is 

The minimum high level

the driver is sou

Figure 1-7 is 

limited by an external resistor. 

 

By default, Output Port 0 is assigned to transmit an integration enabled 

(Int-En) signal that indicates when exposure is taking place. By default, 

Output Port 1 is assigned to transmit a trigger ready (Trig-Rdy) signal that 

goes high to indicate the earliest point at which exposure start for the next 

frame can be triggered. Please refer “1.6 Integrate Enabled Signal Timing” 

for a detailed camera signal integrate timing chart. The pin assignment of 

the camera output sig

 can be changed. Please 

nals to physical output ports

refer “5.7 External Trigger” for detailed information. 

 - 

14 

-