Справочник Пользователя для HP RC3000
RC3000 Antenna Controller
Chapter 3
Detailed Operation
116
3.3.1.3.10 Stow & Deploy Positions
The STOW & DEPLOY group allows the user to change the target positions for STOW and DEPLOY
movements.
movements.
AZ_STW: 0.0 AZ_DEP: 0.0 CONFIG-STOW
EL_STW: -67.5 EL DEP: 22.3 EL_TIME: 0
PL STW: 0.0 PL_DEP: 0.0 PL_ENABLE:0
AZIMUTH STOW <-180.0/180.0>
AZ_STW:
AZIMUTH STOW <-180.0/180.0>
EL_STW:
ELEVATION STOW <-90.0/90.0>
PL_STW:
POL STOW <-180.0/180.>
These items define the STOW position.
AZ_DEP: AZIMUTH
DEPLOY<-180.0/180.0>
EL_DEP:
ELEVATION DEPLOY <-90.0/90.0>
PL_DEP:
POL DEPLOY <-180.0/180.0>
These items define the DEPLOY position.
PL_ENABLE:
POL MOVE <0-NONE 1-STOW 2-DEPLOY 3-BOTH>
This item defines whether or not the polarization axis is moved during a STOW and/or DEPLOY.
0 – the polarization axis will not be moved as part of either STOW or DEPLOY
1 – polarization will move to the PL STW position as part of STOW (no DEPLOY movement)
2 – polarization will move to the PL DEP position as part of DEPLOY (no STOW movement)
3 – polarization will move during both STOW and DEPLOY
NOTE: the default value is to have polarization move during DEPLOY to be consistent with earlier
versions of the software. Default STOW movement is per mount.
versions of the software. Default STOW movement is per mount.
EL_TIME:
ELEV STOW TIMER<0-DISABLE, 1-99 SECONDS>
On certain mounts there needs to be a delay between the time that the elevation stow limit is sensed and
when the elevation motor is deenergized. For mounts where this is not the case, this item is ignored.
when the elevation motor is deenergized. For mounts where this is not the case, this item is ignored.