Справочник Пользователя для HP FIBRE CHANNEL TO SCSI ROUTER M8201R

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005

This section includes:

This section describes how to install the Fibre Channel to SCSI router and what to 
consider when unpacking the unit for the first time. The Fibre Channel to SCSI router 
can be set up as either on a desktop or in a rack.

Before physically installing the Fibre Channel to SCSI router, consider carefully the 
location for the unit installation, the intended use of the unit, and the type of devices to 
which the unit will be attached.

The Fibre Channel to SCSI router can be placed on a desktop or mounted in a 19-inch 
rack depending on the specific requirements of the installation.

The operating environment should meet the requirements listed in 

. If you plan to use the Fibre Channel to SCSI router on a desk top, 

attach the stick-on feet to the bottom of the unit.

Unpack the shipping container of the Fibre Channel to SCSI router in an area clear of 
any clutter:

1. Remove all items from the shipping container. Check each item for any damage. 

Keep the Fibre Channel to SCSI router in the protective bag until you are ready to 
install it.

2. Make sure you received all the equipment you ordered. If an item is missing, 

contact your sales representative immediately.

Caution. When installing the Fibre Channel to SCSI router, use only the screws and other 
hardware provided in the shipping container for the router. Using alternate hardware might 
cause damage to the unit.

Note. The Fibre Channel to SCSI router has cooling fans mounted inside the enclosure and 
air intake vents on the front of the enclosure. The rear exhaust vents and the front intake vents 
should remain clear of obstructions to ensure proper air flow.