Справочник Пользователя для HP Performance Optimized Data Center (POD) 40c
Environmental control system 40
4.
Click Connect.
Locating the ECS IP addresses
IMPORTANT:
The ECS has three NIC addresses: 10.10.10.1, 10.10.10.2, and an IP address
that is set up by the customer for external communication.
The PLC must be connected to locate the IP address for each NIC. For more information, see "Managing the
ECS from the HP POD 40c G2 (on page
ECS from the HP POD 40c G2 (on page
)."
To locate the ECS IP address:
1.
Select Start>Run.
2.
Enter ipconfig.
The IP address appears.
The IP address appears.
-or-
1.
Select Start>Network and Sharing Center.
2.
Right-click Local Area Network.
3.
Click the Support tab.
The IP address appears.
The IP address appears.