Справочник Пользователя для Hitachi DV-RX7000E
16 - English
Method 2: Antenna + VCR/satellite
receiver/cable box + DVD Recorder
+ TV
receiver/cable box + DVD Recorder
+ TV
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
connections, make sure that all components are
switched off and unplugged from the wall outlet.
1. Connect the cable from the antenna/cable TV outlet
to the antenna input on your VCR/satellite
receiver/cable box.
receiver/cable box.
2. Connect the antenna output of your VCR/satellite
receiver/cable box to the ANTENNA IN of DVD-
Recorder using antenna cable.
Recorder using antenna cable.
3. Use another RF antenna cable to connect the
ANTENNA OUT of DVD-Recorder to the antenna
input on your TV.
input on your TV.
4. Connect the AV1 connector on DVD-Recorder to the
SCART AV connector on TV using a SCART cable.
5. Connect the AV2 connector to a SCART AV
connector on VCR/satellite receiver/cable box.
6. Setup “AV1 Out option” using on-screen menu. Refer
to page 30.
4
5
1
2
3
external device
(VCR/satellite receiver/cable box)
(VCR/satellite receiver/cable box)
Method 3: Antenna + DVD Recorder
+ external decoder box + TV
+ external decoder box + TV
If you connect external decoder box to DVD recorder,
you can record scrambled channels received through
the built-in TV tuner in DVD-Recorder.
you can record scrambled channels received through
the built-in TV tuner in DVD-Recorder.
1. Connect RF antenna cables as shown.
2. Connect the AV1 connector on this recorder to the
SCART AV connector on TV using a SCART cable.
3. Connect the AV2 connector to a SCART AV
connector on decoder box.
4. Set channel decoding function on using on-screen
menu. Refer to page 27.
2
3
1
4