Справочник Пользователя для Hitachi DZ-MV780A

English

123

Turn the TV on and set the input selector to 
“VCR” whichever applicable Video input.

Refer to the TV instruction manual for how to 
switch the TV input.

Turn the DVD video camera/recorder on.

The image that the DVD video camera/
recorder is seeing will appear on the TV 
screen.
You can also monitor the image on the LCD 
screen or viewfinder of the DVD video 
camera/recorder.

Perform playback, recording or editing.

You can perform playback, editing or editing 
on Disc Navigation while checking on TV 
screen.

• Adjust the volume of sound on TV.
• The infrared remote control is useful when operating 

the DVD video camera/recorder while viewing an 
image on TV screen. However, if you use a Hitachi 
VCR, the remote control may inadvertently operate 
the VCR if it is near the DVD video camera/recorder. 
To prevent this, set the remote control code of the 
VCR to a position other than “VCR2”.

• Information that the DVD video camera/recorder is 

recording will appear on the TV screen: You can also 
display only part of information or switch off the 
display. Refer to “SETTING ON-SCREEN DISPLAY 
OUTPUT ON OR OFF (OSD OUTPUT)” on page 97, 
and press the DISPLAY button to switch the display 
status.

• When copy-guarded disc is played back, no image will 

appear on TV screen.

• If you use TV with wide mode (aspect ratio 16:9) and 

set the TV to the wide mode, the entire Disc 
Navigation display may not be displayed on the TV 
screen. If this happens, release the wide mode setting 
on TV (see the TV instruction manual for releasing the 
wide mode).