Справочник Пользователя для Graco 332574D - RS Gun Cutter Assemblies
Repair
16
332574D
Air Motor Component
Installation
Installation
1.
Lubricate o-rings and install the air motor into the
muffler housing.
muffler housing.
2.
Orient the nut bearing cap upside down and install
the plunger with o-ring, spring, and washer.
the plunger with o-ring, spring, and washer.
3.
Screw the air motor assembly on the nut bearing
cap. Torque to 120-140 in-lb (14-16 N•m).
cap. Torque to 120-140 in-lb (14-16 N•m).
4.
Use an arbor press to push the muffler housing
down until it is flush with the bearing cap.
down until it is flush with the bearing cap.
5.
NOTICE
To avoid damage to the o-rings caused by the threads
of the air motor, insert the air motor as shown below.
of the air motor, insert the air motor as shown below.
r_258899_3a0232_6k
r_258899_3a0232_3a
r_258899_3a0232_5k
Correct
Incorrect
r_258899_3a0232_4a