Справочник Пользователя для Goodmans GCR1880DAB

Press the 

 1 

MODE/MENU Button 

to switch to FM Mode from DAB 

Mode.

Once in FM mode, the radio will play 

the station at the beginning of the FM 

frequency range (87.50MHz) or will play 

the last FM station you were listening 

to.

Make sure no other order/system 

 1 

setting is being accessed, then 

press the < or > Button to change 

the frequency by 0.05MHz until the 

required station plays.

Auto-scan
Before performing this, please refer to 

the below ‘Scan Setting’ to make this 

function more effective.
Auto-scanning can be performed by 

following these steps: 

Press and hold the 

 1 

> or < Button 

while FM frequency shows. 

Your radio will skip forwards or 

backwards until it reaches the next 

available station.

Scan Setting
By default, FM scans stop at any 

available station. This may result in a 

poor signal-to-noise ratio (hiss) from 

weak stations.
To change the scan settings to stop only 

at stations with good signal strength:

Press and hold the 

 1 

MODE/MENU 

Button.
Release the Button when the 

 2 

display shows: 

<Scan setting> 

<Strong station only> 
Press the 

 3 

SElECT Button to 

confirm.

Audio Setting
By default, all stereo stations are 

reproduced in stereo. For weak stations, 

this may result in a poor signal-to noise 

ratio (hiss).
To play weak stations in mono:

Press and hold the 

 1 

MODE/MENU 

Button 
Release the button when the 

 2 

display shows: 

< Audio setting >  

<Forced mono >
Press the 

 3 

SElECT Button to 

confirm.

DON’T FORGET!  The display will 

show the frequency changing until it 

stops on the next station.