Справочник Пользователя для Galaxy Metal Gear 65

Скачать
Страница из 258
Galaxy 65 User Guide
82
7.16.2.1
SAM: Manage/Utilities/Debug Utilities/Save Debug Logs/Save Log Files
1
You may optionally enter contact information, which will be included in the log information file. By doing 
so, your contact information and comments will help create a unique document that may be used to 
identify the issue and origin when these logs are being collected for diagnostic purposes.
2
Make checkbox selections for the logs you want to collect:
• Device status summary - basic status and configuration information for the device.
• Event logs - event logs from both controllers when in active-active mode.
• Diagnostic debug logs - debug logs from both controllers when in active-active mode.
• Boot logs - startup sequence for each storage controller. 
• Critical error logs - up to 4 critical error dumps from each controller. these will not exist if no critical 
errors have occurred.
• CAPI trace - interface activity between the controller’s internal processors.
3
Click on Generate Debug Logs - this operation can take up to several minutes, depending on the logs 
selected.”
4
Click on Download Selected Logs To File - to use your browser’s file save capabilities to save the log 
in the location you prefer.
5
Name the file - to include date. bug number or problem name and some indication that this is a combined 
log, e.g. 20030113_bug#123_Combined.logs.
7.16.2.2
Disk Array Administrator on Controller A: Utilities Menu
1
Start a data capture session on your terminal emulator program (in Hyperterm this is the Transfer/
Capture Menu
 drop-down menu selection.
2
 Name the file - to include date. bug number or problem name and SM-A or -B, e.g. 
20030113_bug#123_SM-A.txt.
3
Select Dump Debug Info from the utilities menu of Disk Array Administrator.
4
Allow the data dump to complete.
5
Stop the data capture session on your terminal emulator program.
7.16.2.3
Disk Array Administrator on Controller B: Utilities Menu
1
Repeat the procedure in section 
7.16.2.2
 for the second controller.
7.16.3 Configuring Debug Logs
If you are advised by your supplier to modify the or most log collection scenarios, you should utilize the 
debug log setup that is the default on the RAID system when it is shipped to you. If you are advised by 
your supplier to modify the debug log setup, carry out the following procedure:
1
Follow the steps in section 
7.16.2.1 on page 82
.
2
Select the Debug Configuration options as advised by your supplier.